Construction & Site Work Dust Extractors — Bradford
Construction & site work — Bradford
V-TUF supplies M-Class and H-Class dust extraction to construction sites across Bradford and the Bradford Metropolitan District. The Forster Square regeneration, Manningham Mills heritage conversion — one of the largest Victorian textile mill complexes in the world — Bradford City Village and the Southern Gateway all generate sustained CDM-compliant dust extraction demand. Bradford Teaching Hospitals NHS Foundation Trust operates Bradford Royal Infirmary and St Luke's Hospital — both with active capital works programmes requiring ICRA-compliant H-Class extraction in clinical areas.
Bradford's sandstone and millstone grit building stock means silica risk is elevated on any masonry operations across the district.
V-TUF regularly supplies contractors working across Bradford city centre, Forster Square, Manningham, Shipley, Bingley and surrounding Bradford Metropolitan District construction sites.
Recommended machines
V-TUF MINI HSV — M-Class dust extractor, compact
H13 HEPA, 99.9% filtration. Suited to first and second fix work across the Forster Square, Broadway and Manningham Mills programmes. Available in 110V and 240V. SKU MINIHSV110 / MINIHSV240.
View MINI HSV M-Class extractor →
V-TUF MIGHTY HSV — 21L M-Class dust extractor
21-litre wet/dry, autostart power take-off. The sustained M-Class specification for Bradford's major construction and regeneration programmes. SKU MIGHTYHSV110 / MIGHTYHSV240.
View 21L M-Class dust extractor →
V-TUF MIDI H-Class — 21L H-Class dust extractor
H14 HEPA at 99.995%. Mandatory for silica-generating masonry and stonework operations at Manningham Mills and across Bradford's sandstone building stock, and for all construction within the BTHFT hospital estate under ICRA protocols. SKU MIDIH110 / MIDIH240.
Typical use case — Manningham Mills heritage conversion
A heritage contractor working on the Manningham Mills conversion runs MIDI H-Class units for all sandstone cutting, grinding and chasing operations — Bradford's local millstone grit and sandstone generates significant silica exposure during masonry work, making H-Class the correct specification. MIGHTY HSV M-Class units cover the internal fit-out and plaster work phases. Contractor trade account in place — next-day delivery to BD9 postcode.
Compliance notes for Bradford construction sites
- CDM 2015 Regulation 15(2) — principal contractors must demonstrate dust control planning in the pre-construction health and safety plan.
- COSHH 2002 — RCS WEL 0.1mg/m³ over an 8-hour TWA. H-Class required for silica-generating operations — particularly relevant for Bradford's sandstone and millstone grit building stock.
- Control of Asbestos Regulations 2012 — H-Class extraction mandatory for any work near or involving asbestos-containing materials in pre-2000 Bradford buildings. Manningham Mills and Bradford's extensive Victorian and Edwardian mill and warehouse stock are high-risk environments for ACMs in insulation, lagging and structural fire protection.
- ICRA — Bradford Teaching Hospitals NHS FT — ICRA required for all works inside Bradford Royal Infirmary and St Luke's. H-Class mandatory for Type C and D work in clinical areas.
- 110V on site — all V-TUF M-Class and H-Class extractors available in 110V CTE.
Further reading on dust control, COSHH compliance and extraction class selection for Bradford sites:
- Silica dust on construction sites: what the regulations actually require →
- M-Class or H-Class: why it depends on what the building is made of →
- ICRA in healthcare construction: what contractors working inside hospitals need to know →
- Asbestos in construction: what CAR 2012 requires for contractors in pre-2000 buildings →
CDM 2015 → COSHH Regulations 2002 → Control of Asbestos Regulations 2012 → ICRA → Electricity at Work Regulations 1989 →
Choosing the right dust extractor for your Bradford site
- General fit-out, refurbishment and residential new-build: MINI HSV (compact M-Class) or MIGHTY HSV (21L for sustained use)
- Sandstone, millstone grit or any masonry cutting and grinding: MIDI H-Class (H14 HEPA, 99.995%) — silica risk is elevated on Bradford's heritage stone stock
- Victorian or Edwardian mill and warehouse refurbishment with suspected ACMs: MIDI H-Class mandatory — see Control of Asbestos Regulations 2012 →
- Works inside BTHFT estate under ICRA: MIDI H-Class mandatory for Type C and D clinical areas
- 110V site requirement: All three machines available in 110V CTE
Contractor account terms available — next-day delivery to Bradford BD postcodes on stocked items. Telephone 01522 787978.
Frequently asked questions
Is H-Class required for masonry work on Bradford's sandstone buildings?
Yes — sandstone and millstone grit contain crystalline silica. Any cutting, grinding, drilling or chasing of Bradford's traditional stone building stock generates respirable crystalline silica dust requiring H-Class extraction under COSHH 2002. M-Class is not sufficient for sandstone or millstone grit masonry operations.
What extraction is required for works inside Bradford Royal Infirmary?
All construction and maintenance inside BRI or St Luke's requires an ICRA before starting. For Type C and D work in clinical areas H-Class extraction is mandatory. The MIDI H-Class with sealed filtration and HEPA-certified disposal bags is the correct specification.
Do principal contractors on Bradford city centre projects mandate 110V?
Yes — most principal contractors on Bradford's major commercial programmes mandate 110V CTE for all portable electrical equipment on site.
For residential environments where damp, mould or indoor air quality issues are present — including social housing and void properties across Bradford and West Yorkshire — see Condensation mould vs penetrating damp: how to tell the difference → and Black mould on walls: what it is and what to do →
Servicing, spares and ongoing support
All V-TUF M-Class and H-Class extractors supported with UK-based spare parts and full servicing. HEPA cartridges and certified disposal bags held for ICRA-compliant use across the BTHFT estate.
Dust generated by cutting, grinding and drilling on Bradford construction sites must be controlled at source under COSHH 2002. See COSHH Regulations guidance → and M-Class or H-Class extraction guidance → for a full breakdown of compliant dust control requirements.