V-TUF GB Range Troubleshooting

GB Range · Support

Troubleshoot Your GB Pressure Washer

Pick the problem below and we’ll show you the most likely cause, the step-by-step fix, and any parts you might need. Covers the full GB range — GB065, GB065C, GB065SSE, GB080, GB080XP, GB110, GB110SSE, GB110XP, GB130 and GB130SSE.

All GB models covered All GB machines share the same Honda gearbox-driven pump family. Troubleshooting issues, causes and fixes apply across the range. Where a fix differs by model size it is noted in the steps.
1

What’s Going Wrong?

5 Things To Check Before Anything Else

1. Engine oilAll GB engines have a low-oil cut-out. Check the dipstick before every start. The Honda GX200/GX270/GX390 all require SAE 10W-30.
2. Pump oilHalf-level on the pump sight glass. Top up with V-TUF Pressure Lube PL500. Change after first 50 hours, then every 500 hours.
3. Water supplyGB machines feed from mains or an external tank. Confirm supply is on, pressure is adequate (min 1 Bar), and the inlet hose is not kinked.
4. Fresh petrolDrain and refill if over 30 days old. Stale petrol is the number one cause of starting failures and rough running on Honda engines.
5. Trigger before startSqueeze the gun trigger to release residual pressure in the system before pulling the recoil cord or pressing electric start (SSE models).