Construction & Site Work Dust Extractors — Luton
Construction & site work — Luton
V-TUF supplies M-Class and H-Class dust extraction to construction sites across Luton and Bedfordshire. London Luton Airport's terminal expansion, the Power Court regeneration, New Century Park commercial development and the University of Bedfordshire campus expansion all generate sustained CDM-compliant dust extraction demand. Luton and Dunstable University Hospital NHS Trust operates L&D Hospital at Lewsey Road with active capital works requiring ICRA-compliant H-Class extraction in clinical areas.
V-TUF regularly supplies contractors working across Luton town centre, Power Court, Houghton Regis, Dunstable and surrounding Bedfordshire construction sites.
Recommended machines
V-TUF MINI HSV — M-Class dust extractor, compact
H13 HEPA, 99.9% filtration. Available in 110V and 240V. SKU MINIHSV110 / MINIHSV240.
View MINI HSV M-Class extractor →
V-TUF MIGHTY HSV — 21L M-Class dust extractor
21-litre wet/dry, autostart power take-off. Sustained M-Class specification for Luton's major construction and regeneration programmes including Power Court and Houghton Regis residential. SKU MIGHTYHSV110 / MIGHTYHSV240.
View 21L M-Class dust extractor →
V-TUF MIDI H-Class — 21L H-Class dust extractor
H14 HEPA at 99.995%. Mandatory for silica-generating operations, for all construction within the LDUH estate under ICRA protocols, and for Luton Airport terminal works in occupied environments. SKU MIDIH110 / MIDIH240.
Typical use case — Power Court regeneration, Luton
A principal contractor on the Power Court development runs MIGHTY HSV M-Class units (110V, autostart) across all cutting, grinding and chasing operations. MIDI H-Class units specified for demolition and masonry phases. 110V CTE is the site standard. Contractor trade account — next-day delivery to LU1 postcode.
Compliance notes for Luton construction sites
- CDM 2015 Regulation 15(2) — principal contractors must demonstrate dust control planning in the pre-construction health and safety plan.
- COSHH 2002 — RCS WEL 0.1mg/m³ over an 8-hour TWA. H-Class required for silica-generating operations.
- Control of Asbestos Regulations 2012 — H-Class extraction mandatory for any work near or involving asbestos-containing materials in pre-2000 Luton buildings. Social housing regeneration across Luton Borough Council's large estate involves pre-2000 residential and commercial stock where ACMs in textured coatings, floor tiles and pipe lagging are a documented risk.
- ICRA — Luton and Dunstable University Hospital NHS Trust — ICRA required for all works inside L&D Hospital. H-Class mandatory for Type C and D work in clinical areas.
- Luton Airport construction — airside construction within the terminal expansion boundary requires dust management controls equivalent to ICRA. H-Class extraction for all dust-generating operations in occupied terminal environments.
- 110V on site — all V-TUF M-Class and H-Class extractors available in 110V CTE.
Further reading on dust control, COSHH compliance and extraction class selection for construction materials used across Luton sites:
- Silica dust on construction sites: what the regulations actually require →
- M-Class or H-Class: why it depends on what the building is made of →
- ICRA in healthcare construction: what contractors working inside hospitals need to know →
- Asbestos in construction: what CAR 2012 requires for contractors in pre-2000 buildings →
CDM 2015 → COSHH Regulations 2002 → Control of Asbestos Regulations 2012 → ICRA → Electricity at Work Regulations 1989 →
Choosing the right dust extractor for your Luton site
- General fit-out, refurbishment and residential new-build: MINI HSV or MIGHTY HSV (M-Class)
- Silica-generating work — cutting, grinding, drilling masonry: MIDI H-Class (H14 HEPA, 99.995%)
- Pre-2000 building refurbishment or demolition with suspected ACMs: MIDI H-Class mandatory — see Control of Asbestos Regulations 2012 →
- Works inside L&D Hospital under ICRA: MIDI H-Class mandatory for Type C and D clinical areas
- Luton Airport terminal works in occupied environment: MIDI H-Class for all dust-generating operations
- 110V site requirement: All three machines available in 110V CTE
Contractor account terms — next-day delivery to Luton LU postcodes. Telephone 01522 787978.
Frequently asked questions
What extraction is required for construction inside Luton and Dunstable University Hospital?
All construction and maintenance inside L&D Hospital requires an ICRA before starting. For Type C and D work in clinical areas H-Class extraction is mandatory. The MIDI H-Class with sealed filtration and HEPA-certified disposal bags is the correct specification.
What dust control is required for airside construction at Luton Airport?
Airside construction at Luton Airport's terminal expansion requires dust management controls equivalent to ICRA protocols — H-Class extraction for all dust-generating operations in occupied terminal environments. The MIDI H-Class is the correct specification.
For residential environments where damp, mould or indoor air quality issues are present — including social housing and void properties across Luton and Bedfordshire — see Condensation mould vs penetrating damp: how to tell the difference → and Black mould on walls: what it is and what to do →
Servicing, spares and ongoing support
All V-TUF M-Class and H-Class extractors supported with UK-based spare parts and full servicing. HEPA cartridges and certified disposal bags held for ICRA-compliant use across the LDUH estate.
Dust generated by cutting, grinding and drilling on Luton construction sites must be controlled at source under COSHH 2002. See COSHH Regulations guidance → and M-Class or H-Class extraction guidance → for a full breakdown of compliant dust control requirements.