Construction & Site Work Dust Extractors — Sheffield
Construction & site work — Sheffield
V-TUF supplies M-Class and H-Class dust extraction to construction sites across Sheffield and South Yorkshire. The Heart of the City II development is transforming Sheffield city centre with new commercial, retail and residential space. The HS2 Meadowhall interchange and ongoing transport infrastructure work, social housing regeneration across Burngreave, Manor and Parson Cross, and capital works programmes at Sheffield Teaching Hospitals all generate sustained CDM-compliant dust extraction demand.
V-TUF regularly supplies contractors working across Sheffield city centre, Attercliffe, Burngreave, Hillsborough, Rotherham and surrounding South Yorkshire construction sites.
Understanding when M-Class is sufficient and when H-Class extraction is required is a core compliance decision on Sheffield construction sites — particularly across the city's advanced manufacturing and engineering facilities and hospital estate works. See M-Class or H-Class: why it depends on what the building is made of → for a full breakdown of extraction class requirements by material.
Recommended machines
V-TUF MINI HSV — M-Class dust extractor, compact
Designed for M-Class compliant dust control on Sheffield fit-out and refurbishment sites. H13 HEPA, 99.9% filtration. Suited to social housing void work, city centre fit-out and university refurbishment across Sheffield Hallam and the University of Sheffield. Available in 110V and 240V. SKU MINIHSV110 / MINIHSV240.
View MINI HSV M-Class extractor →
V-TUF MIGHTY HSV — 21L M-Class dust extractor
Designed for sustained M-Class dust control on Sheffield's major construction programmes. 21-litre wet/dry, autostart power take-off for cut-off saws, wall chasers and angle grinders. SKU MIGHTYHSV110 / MIGHTYHSV240.
View 21L M-Class dust extractor →
V-TUF MIDI H-Class — 21L H-Class dust extractor
Designed for silica-generating work where H-Class is required under COSHH guidance, and for construction within Sheffield Teaching Hospitals estate under ICRA protocols. H14 HEPA at 99.995%. SKU MIDIH110 / MIDIH240.
Compliance notes for Sheffield construction sites
- CDM 2015 Regulation 15(2) — principal contractors on Heart of the City II and Sheffield Teaching Hospitals capital works must demonstrate dust control planning in the pre-construction health and safety plan.
- COSHH 2002 — RCS WEL 0.1mg/m³ over an 8-hour TWA. H-Class required for silica-generating operations.
- Control of Asbestos Regulations 2012 — H-Class extraction mandatory for any work near or involving asbestos-containing materials in pre-2000 Sheffield buildings. Social housing regeneration across Burngreave, Manor and Parson Cross involves post-war system-built properties that frequently contain ACMs in textured coatings, floor tiles and pipe lagging.
- ICRA (Sheffield Teaching Hospitals) — any contractor working inside the STH estate must complete an Infection Control Risk Assessment. H-Class extraction mandatory for Type C and D work in clinical areas.
- 110V on site — all V-TUF M-Class and H-Class extractors available in 110V CTE.
Further reading on dust control, COSHH compliance and extraction class selection for construction materials used across Sheffield sites:
- Silica dust on construction sites: what the regulations actually require →
- M-Class or H-Class: why it depends on what the building is made of →
- ICRA in healthcare construction: what contractors working inside hospitals need to know →
- Carbon fibre dust and COSHH: is it as dangerous as silica and what extraction is required? →
- Asbestos in construction: what CAR 2012 requires for contractors in pre-2000 buildings →
CDM 2015 → COSHH Regulations 2002 → Control of Asbestos Regulations 2012 → ICRA → Electricity at Work Regulations 1989 →
Choosing the right dust extractor for your Sheffield site
- General fit-out, refurbishment and drywall: MINI HSV (compact M-Class) or MIGHTY HSV (21L for sustained use)
- Silica-generating work — cutting, grinding, drilling masonry: MIDI H-Class (H14 HEPA, 99.995%)
- Pre-2000 social housing refurbishment with suspected ACMs: MIDI H-Class mandatory — see Control of Asbestos Regulations 2012 →
- Working inside Sheffield Teaching Hospitals under ICRA: MIDI H-Class mandatory for Type C and D work
- 110V site requirement: All three machines available in 110V CTE site-safe specification
Not sure whether M-Class or H-Class applies to your specific Sheffield site materials? Read the building material guide →
For guidance on selecting the correct M-Class or H-Class dust extractor for Sheffield and South Yorkshire construction sites — telephone 01522 787978. Contractor account terms available, next-day delivery to Sheffield and South Yorkshire postcodes on stocked items.
Frequently asked questions
Is H-Class extraction required for construction inside Sheffield Teaching Hospitals?
Yes. Any construction or maintenance work inside the Sheffield Teaching Hospitals estate requires an Infection Control Risk Assessment (ICRA) before starting. For Type C and D work in clinical areas, H-Class extraction is mandatory. The V-TUF MIDI H-Class (MIDIH110 / MIDIH240) is the correct specification.
What extraction class is required on the Heart of the City II development?
M-Class is the minimum for general construction dust. H-Class is required wherever silica is generated — cutting, grinding or drilling of concrete, brick, stone or mortar. On a mixed commercial programme of Heart of the City II's scale, H-Class is typically mandated for all masonry operations.
Do Sheffield principal contractors mandate 110V equipment on site?
Yes — most principal contractors on Sheffield's major programmes mandate 110V CTE for all portable electrical equipment on site. All V-TUF M-Class and H-Class dust extractors are available in 110V site-safe specification under the Electricity at Work Regulations 1989.
For residential environments where damp, mould or indoor air quality issues are present — including social housing stock across Sheffield and South Yorkshire — see Condensation mould vs penetrating damp: how to tell the difference → and Black mould on walls: what it is and what to do →
Servicing, spares and ongoing support
All V-TUF M-Class and H-Class dust extractors are supported with UK-based spare parts availability and full servicing support. Filters, hoses, motors and switchgear are held for every machine in current production to support long-term use across Sheffield and South Yorkshire construction sites.
V-TUF Support Hub → Spare parts for all machines →
For technical support, spare parts queries or servicing requirements — telephone 01522 787978.
Dust generated by cutting, grinding and drilling on Sheffield construction sites must be controlled at source under COSHH 2002, with extraction class matched to the material and hazard profile of the task. See COSHH Regulations guidance → and M-Class or H-Class extraction guidance → for a full breakdown of compliant dust control requirements.