V-TUF V2240X2 Troubleshooting
V-TUF V2240X2 · Support
Troubleshoot Your V2240X2
Pick the problem you're seeing below and we'll show you the most likely cause, the step-by-step fix, and any parts you might need. Quick pre-checks at the bottom catch the most common issues.
1
What's Going Wrong?
5 Things To Check Before Anything Else
1. Power supplyStandard 13A 240V socket. Do NOT use a reeled domestic extension cable — voltage drop will burn the motor out.
2. Water supplyInlet pressure 0.01–0.4 MPa. Inlet hose at least 5 m, no kinks, no in-line valves in the couplings.
3. Inlet filterPop the inlet fitting off and check the brass filter is clean and free of grit.
4. Trigger before switch-onSqueeze the gun trigger as you switch the machine on — this releases any trapped pressure and bleeds air from the pump.
5. Don't run dryAlways turn the water supply on BEFORE the machine. Never run more than 1 minute with the trigger released.