TORRENT XRT200 Troubleshooting

TORRENT XRT200 · Support

Troubleshoot Your XRT200

Pick the problem you're seeing below and we'll show you the most likely cause, the step-by-step fix, and any parts you might need. Quick pre-checks at the bottom catch the most common issues.

1

What's Going Wrong?

5 Things To Check Before Anything Else

1. Water supply1–8 bar inlet pressure and at least 12 L/min flow. Use a 1/2" hose minimum.
2. Pump oilHalf-level on the pump's sight glass. Top up with V-TUF Pressure Lube PL500.
3. Engine oilThe Honda GX200 has an oil-alert. Low engine oil will kill the spark.
4. Fresh petrolDrain and refill if stored over 30 days. Stale fuel is the #1 cause of starting failures.
5. Trigger before startSqueeze the gun trigger to release pressure before pulling the recoil cord.