Aerospace & Advanced Manufacturing Cleaning Equipment — Bristol
Aerospace & advanced manufacturing — Bristol
V-TUF supplies production floor vacuums, composite dust extraction and hot-water degreasing systems to aerospace and advanced manufacturing businesses across Bristol and the West of England. Rolls-Royce at Filton manufactures wide-chord fan blades for the Trent engine family. GKN Aerospace at Filton and Avonmouth produces composite aerostructures for Airbus programmes. Leonardo manufactures helicopter systems at Yeovil, serving a substantial Bristol-area supply chain. The National Composites Centre at the Bristol & Bath Science Park and Safran Landing Systems at Filton round out one of the most technically demanding industrial cleaning environments in the UK.
V-TUF regularly supplies contractors and maintenance teams working across the Filton aerospace estate, Avonmouth industrial zone and the Bristol & Bath Science Park advanced manufacturing corridor.
Production floor and swarf collection vacuums
V-TUF MAMMOTH 240V Stainless — 80L heavy-duty wet/dry vacuum
Designed for daily production floor use where aerospace machining, composite lay-up and component assembly generate wet and dry debris. 3.5kW twin-motor, 80-litre stainless tank. Stainless construction resists corrosion from cutting fluids and hydraulic fluids. SKU MAMMOTH240-STAINLESS, £989.99.
View 80L stainless wet/dry industrial vacuum →
V-TUF MAMMOTH 110V Stainless — site-rated 80L vacuum
Designed for 110V CTE-compliant production environments. Same 80-litre stainless capacity. For aerospace maintenance contractors within the Filton estate where 110V is the site standard. SKU MAMMOTH110-STAINLESS, £989.99.
Dust extraction for composite and metalworking environments
V-TUF MIDI H-Class — 21L H-Class dust extractor
Designed for composite dust and hazardous particulate extraction where H-Class filtration is required under COSHH guidance. Carbon fibre and glass fibre dust require H-Class extraction at source. H14 HEPA at 99.995%. SKU MIDIH110 / MIDIH240.
View 21L H-Class dust extractor →
V-TUF MIGHTY HSV — 21L M-Class dust extractor
Designed for M-Class compliant dust control across general aerospace maintenance and light manufacturing operations. 21-litre wet/dry capacity. SKU MIGHTYHSV110 / MIGHTYHSV240.
Hot-water degreasing for component and workshop cleaning
V-TUF RAPID VSC 415V — three-phase hot water, stainless
Designed for sustained high-temperature degreasing of aerospace components, tooling and workshop floors. Three-phase 415V, 150 bar, 15 L/min. Stainless body. SKU RAPIDVSC415V, £3,599.99.
View three-phase hot water stainless pressure washer →
V-TUF RAPID MSH 240V — diesel-fired hot water, mobile
Designed for mobile degreasing operations where fixed hot water is impractical across the Filton and Avonmouth industrial estates. 240V pump, diesel-fired boiler, 120 bar, 9 L/min. SKU RAPIDMSH240V, £2,999.99.
Choosing the right equipment for aerospace and manufacturing cleaning
- Production floor cleaning and fluid recovery: MAMMOTH 240V Stainless (80L, twin-motor)
- Composite and hazardous dust extraction: MIDI H-Class (H14 HEPA, 99.995%)
- General manufacturing dust control: MIGHTY HSV (M-Class, H13 HEPA)
- High-temperature degreasing at a fixed installation: RAPID VSC 415V (three-phase, stainless)
- Mobile degreasing across large industrial sites: RAPID MSH 240V (diesel-fired boiler)
- Explosive dust zones (DSEAR classified): ATEX-rated specialist equipment required — contact V-TUF for options
For guidance on selecting the right equipment for your Bristol aerospace or advanced manufacturing facility — telephone 01522 787978. Trade and manufacturing account terms available.
Frequently asked questions
What vacuum is required for CFRP composite dust in aerospace manufacturing?
Carbon fibre reinforced polymer (CFRP) dust is classified as a hazardous substance under COSHH 2002. H-Class extraction is required — H14 HEPA at 99.995% filtration. The V-TUF MIDI H-Class (MIDIH110 / MIDIH240) is the correct specification. M-Class extraction is not sufficient for composite dust in sustained cutting or trimming operations.
Do I need ATEX-rated equipment for composite dust at my Bristol facility?
This depends on whether your facility has a DSEAR zone classification. Fine aluminium and carbon fibre dusts can be combustible in certain concentrations. If your DSEAR risk assessment has classified any area as Zone 20, 21 or 22, standard industrial vacuums cannot be used in those zones. Contact V-TUF on 01522 787978 to discuss ATEX options.
What pressure washer is best for degreasing aerospace components at Filton?
Hot water is required to effectively remove cutting oils, hydraulic fluids and manufacturing residues. For fixed facilities with three-phase supply, the RAPID VSC 415V (stainless, 150 bar, 15 L/min) is the standard specification. For mobile operations across the Filton and Avonmouth estates, the RAPID MSH 240V (diesel-fired boiler, 120 bar) provides independent hot-water capability.
Servicing, spares and ongoing support
All V-TUF pressure washers and industrial vacuums are supported with UK-based spare parts availability and full servicing support. Motors, pump components, HEPA filters and hoses are held for every machine in current production to minimise downtime across Bristol's aerospace and advanced manufacturing operations.
V-TUF Support Hub → Spare parts for all machines →
For technical support, spare parts queries or servicing requirements — telephone 01522 787978.
Wash-down water containing cutting fluids, hydraulic oils or manufacturing residues must not enter surface water drains. Discharge to sewer requires trade effluent consent from Wessex Water. See Environmental Permitting guidance →