Automotive Trade & Bodyshop Equipment Edinburgh | Workshop Cleaning | V-TUF

Automotive trade & bodyshop — Edinburgh

V-TUF supplies M-Class dust extractors, hot-water pressure washers, workshop floor cleaning systems and heavy-duty industrial vacuums to garages, bodyshops, MOT centres, tyre fitters and automotive trade operators across Edinburgh and the Lothians. Edinburgh’s automotive trade is concentrated along Seafield Road, Newbridge, Bankhead Avenue, the A71 Calder Road corridor and the city’s outer ring road. Arnold Clark — Scotland’s largest car dealer group — operates a significant multi-brand franchise estate across Edinburgh including a major complex at Seafield Road. Peter Vardy operates franchise dealerships across the capital. Lookers operates multiple Edinburgh locations. Edinburgh’s independent garage sector — serving a city population of over 520,000 across a diverse vehicle mix — generates substantial workshop cleaning demand across the city and wider Lothians area.

← Back to V-TUF Edinburgh hub

Dust extraction for Edinburgh bodyshop and workshop use

Edinburgh automotive workshops generate hazardous dusts requiring COSHH-compliant extraction. Filler sanding, panel grinding and paint preparation generate fine particulate. Brake pad and disc servicing generates metal particulate and, on pre-2000 vehicles, the risk of residual asbestos (chrysotile). LEV systems must be examined and tested every 14 months under COSHH Regulation 9. These requirements apply identically in Scotland as in England and Wales.

V-TUF MINI HSV — M-Class dust extractor, compact

Designed for M-Class compliant dust control in Edinburgh bodyshops and automotive workshops. H13 HEPA, 99.9% filtration. Suited to filler sanding, panel preparation and light bodywork across Edinburgh’s franchise and independent bodyshop sector. Autostart power take-off for dual-action sanders. Available in 240V. SKU MINIHSV240.

Best suited for: filler sanding, panel preparation, light bodywork, single-bay operations.

View MINI HSV M-Class extractor →

V-TUF MIGHTY HSV — 21L M-Class dust extractor

Designed for sustained M-Class dust control in Edinburgh’s higher-throughput bodyshops and franchise service departments. 21-litre wet/dry capacity, autostart, H13 HEPA filtration. The correct specification for multi-bay operations at Arnold Clark’s Seafield Road complex and Peter Vardy’s Edinburgh franchise bodyshop network. SKU MIGHTYHSV240.

Best suited for: multi-bay franchise bodyshops, sustained sanding operations, Arnold Clark and Peter Vardy Edinburgh franchise LEV compliance.

View 21L M-Class dust extractor →

Workshop floor pressure washers — degreasing and cleaning

V-TUF HD140HOT — 240V hot water pressure washer for workshop floor cleaning

Designed for workshop floor degreasing in Edinburgh garages and service centres. 240V, 140 bar, 8 L/min, up to 85°C. Compact and mobile — suited to single-bay and multi-bay operations across Edinburgh and the Lothians. SKU HD140HOT, £1,699.99.

Best suited for: single-bay floor degreasing, oil and brake fluid removal, mobile use across Edinburgh workshop operations.

View 240V hot water workshop pressure washer →

V-TUF MAMMOTH 240V Stainless — 80L heavy-duty wet/dry vacuum

Designed for fluid collection, swarf removal and general workshop wet/dry use across Edinburgh’s automotive workshops. 3.5kW twin-motor, 80-litre stainless tank. SKU MAMMOTH240-STAINLESS, £989.99.

Best suited for: coolant and oil collection, swarf removal, workshop general wet/dry cleaning.

View 80L stainless workshop vacuum →

Compliance notes for Edinburgh automotive workshops

• COSHH 2002 — bodyshop dust: M-Class on-tool extraction required for all filler sanding and panel preparation. LEV systems must be examined and tested every 14 months under COSHH Regulation 9 and records kept for 5 years. COSHH applies identically in Scotland as in England and Wales.
• Asbestos Regulations 2012 — brake dust: Pre-2000 vehicles may contain chrysotile asbestos in brake pads. Compressed air blow-down prohibited. Vacuum extraction only. The Control of Asbestos Regulations 2012 apply GB-wide including Scotland.
• COSHH 2002 — paint mist and isocyanates: Two-pack paint systems containing isocyanates are respiratory sensitisers. Spraybooth LEV and supplied-air RPE mandatory.
• Scottish Water — workshop runoff: Workshop wash-down water must not enter surface water drains or Edinburgh watercourses. Trade effluent consent from Scottish Water is required for sewer discharge — not an English regional water company.

COSHH Regulations 2002 →

Frequently asked questions

What dust extraction is required for bodyshop operations at Arnold Clark Edinburgh?

M-Class extraction connected to the sanding tool is the minimum legal requirement under COSHH 2002. Arnold Clark’s franchise manufacturer standards across its Edinburgh estate typically require documented LEV compliance as part of approved bodyshop accreditation. The V-TUF MIGHTY HSV (21L, H13 HEPA) with autostart is the preferred specification for multi-bay franchise bodyshop operations at Seafield Road and Newbridge. All LEV systems must be tested every 14 months under COSHH Regulation 9.

Is COSHH the same in Scotland as in England for workshop operations?

Yes — COSHH 2002 applies identically across Great Britain including Scotland. The extraction requirements for filler sanding, brake dust and paint mist are the same in an Edinburgh bodyshop as in any English or Welsh workshop. The only material difference is that workshop wash-down water discharge in Scotland requires trade effluent consent from Scottish Water rather than an English regional water company.

Can I discharge workshop wash-down water to the drain at my Edinburgh garage?

Only to the foul sewer with trade effluent consent from Scottish Water — not to a surface water drain. Workshop wash-down water is trade effluent under the Water Industry (Scotland) Act 2002. Scottish Water’s trade effluent team covers all Edinburgh and Lothians automotive workshop operations.

Servicing, spares and ongoing support

All V-TUF dust extractors and pressure washers are supported with UK-based spare parts availability and full servicing support. Filters, hoses, motors and replacement components are held for every machine in current production.

V-TUF Support Hub →   Spare parts for all machines →

For technical support, spare parts queries or servicing requirements — telephone 01522 787978.