Automotive Trade & Bodyshop Equipment — Hull

Automotive trade & bodyshop — Hull

V-TUF supplies M-Class dust extractors, hot-water pressure washers and heavy-duty wet/dry vacuums to bodyshops, MOT garages, independent workshops and franchise dealer service centres across Hull and the East Riding of Yorkshire. COSHH 2002 requires controlled extraction for brake dust, bodyshop filler sanding and paint mist across all automotive repair operations. Hull's automotive trade clusters along Holderness Road, Clough Road and the Garrison Road retail park — including Jardine Motors, TrustFord and the large independent garage sector across east Hull and the East Riding — generate sustained demand for COSHH-compliant workshop equipment. Workshop runoff must not enter surface water drains — Yorkshire Water trade effluent consent is required for sewer discharge and the Environment Agency enforces discharge to the Humber catchment. The same dealer cluster drives significant mobile valeting and dealership prep demand across the wider East Yorkshire market.

← Back to V-TUF Hull hub

Recommended machines

V-TUF MIGHTY HSV — 21L M-Class dust extractor

COSHH-compliant specification for bodyshop filler sanding, panel preparation and brake dust extraction. H13 HEPA, 99.9% filtration. Autostart power take-off for orbital sanders, DA polishers and angle grinders. 110V and 240V. SKU MIGHTYHSV110 / MIGHTYHSV240.

View MIGHTY HSV M-Class extractor →

V-TUF HD140HOT — 240V hot water pressure washer

240V, 140 bar, 85°C. Workshop floor degreasing, engine bay cleaning and bay wash-down across Hull's franchise dealer service centres and independent garages. SKU HD140HOT.

View HD140HOT hot water pressure washer →

V-TUF MAMMOTH 240V Stainless — 80L wet/dry vacuum

3.5kW twin-motor, 80-litre stainless tank. Coolant and fluid pickup, swarf collection and workshop floor wet/dry maintenance. SKU MAMMOTH240-STAINLESS.

View MAMMOTH 240V stainless vacuum →

Typical use case — Hull franchise dealer service centre

A franchise dealer service centre on Holderness Road runs a MIGHTY HSV M-Class (240V, autostart) connected to the DA sander on the bodyshop prep line — COSHH-compliant filler dust extraction across every panel repair. The HD140HOT handles workshop floor degreasing between bays. The MAMMOTH 240V Stainless manages coolant spills and wet/dry workshop maintenance. All three on a trade account — next-day parts delivery to HU8 postcode.

Compliance notes for Hull automotive workshops

COSHH 2002 — brake dust, bodyshop filler dust and paint mist require controlled M-Class extraction. H-Class required where isocyanate or asbestos risk is identified.
Yorkshire Water — trade effluent consent required for workshop runoff discharge to the public sewer.
Environment Agency Yorkshire — workshop oils and degreasers must not enter the Humber catchment. The Humber Estuary is a designated European Marine Site — enforcement is active.
Asbestos Regulations 2012 — brake dust on pre-2000 vehicles may contain asbestos. H-Class extraction required for brake work on suspect vehicles.

COSHH Regulations 2002 → Environmental Permitting guidance →