Grease & Fat Removal Leicester | Food Production Kitchen Plant Cleaning | V-TUF
Grease and fat removal — fryers, ovens, extraction and kitchen plant
Grease and fat accumulation is one of the most persistent and hazardous cleaning challenges in Leicester food production facilities. Deep fat fryers, combination ovens, bratt pans, extraction canopies, ductwork and grease traps accumulate carbonised fat and polymerised grease that standard cleaning chemicals at ambient temperature cannot remove.
Grease management is a core element of food processing cleaning operations in Leicester, where the catering supply chain operations serving Leicester's large institutional and hospitality sector — including facilities supplying the University of Leicester and De Montfort University catering operations, University Hospitals of Leicester NHS Trust hospital catering, Curve Theatre, the King Power Stadium and Leicester's substantial city centre hospitality estate — generate sustained grease loading in production kitchens and kitchen plant across the city.
Why grease cleaning fails without hot water
Grease and fat polymerise at cooking temperatures — frying, roasting and baking carbonise surface grease into deposits that cold water and detergent cannot penetrate. Hot water at 80°C+ combined with appropriate alkaline degreaser is required to liquefy and emulsify polymerised grease deposits. Pressure then physically removes the emulsified grease from the surface. Without temperature, the chemistry cannot work. Without pressure, the emulsified grease remains on the surface. Both are required for effective grease removal in food production and kitchen plant environments.
Cleaning requirements for grease and fat removal
- Temperature: Minimum 80°C to begin polymerised fat emulsification; 85°C at the lance is the correct specification for fryer surrounds, oven interiors and extraction canopy surfaces with heavy carbonised grease loading.
- Alkaline detergent: Hot water combined with alkaline degreaser is the correct combination for food production kitchen plant. Detergent selection must be compatible with food contact surfaces and drainage trade effluent requirements.
- Pressure and access: Sufficient pressure to remove emulsified grease physically from oven rack channels, fryer basket guides and extraction canopy joints. Lance selection must allow access to confined spaces without forcing grease debris into drain channels.
The same temperature and pressure requirements apply to production floor hygiene, where grease contamination on floor surfaces and drain channels requires hot water mechanical cleaning before chemical disinfection can be effective.
Equipment for grease and fat removal in Leicester food facilities
V-TUF HD140HOT — 240V hot water pressure washer for fryer, oven and kitchen plant cleaning
The standard specification for grease and fat removal from fryers, ovens, bratt pans, extraction canopy internals and production kitchen plant across Leicester's food manufacturing and catering supply operations. 240V, 140 bar, 8 L/min, up to 85°C at the lance. Compact and mobile — suited to manoeuvring around kitchen plant, fryer baskets, oven racks and extraction canopy access points. SKU HD140HOT, £1,699.99.
Best suited for: single fryer and oven clean-downs, extraction canopy internals, bratt pan and kitchen plant surfaces, mobile deep-clean operations.
View 240V hot water pressure washer for grease and kitchen plant cleaning →
V-TUF RAPID VSC 240V — stainless hot water pressure washer for high-volume grease plant
The correct specification for high-volume grease removal across Leicester's larger food production and catering supply operations. 240V, 100 bar, 12 L/min. Stainless construction. Higher flow rate reduces deep-clean time on large kitchen plant with heavy grease loading. Suited to multi-fryer operations and the larger institutional catering supply facilities serving Leicester's universities and NHS Trust catering. SKU RAPIDVSC240V, £3,399.99.
Best suited for: multi-fryer production lines, large institutional catering supply, TR19 extraction cleaning across multiple canopy zones.
View stainless hot water system for high-volume grease removal →
V-TUF MAMMOTH 240V Stainless — 80L wet/dry vacuum for grease trap and drain cleaning
Used for grease trap emptying, drain channel cleaning and recovery of emulsified grease and wash-water after hot water pressure washing of kitchen plant and fryer surrounds. 3.5kW twin-motor, 80-litre stainless tank. Handles grease-laden water without motor damage risk in high-fat environments. SKU MAMMOTH240-STAINLESS, £989.99.
Best suited for: grease trap emptying, emulsified fat recovery post-washdown, drain channel cleaning in high-grease production kitchens.
View 80L stainless vacuum for grease trap and drain collection →
Typical use case in a Leicester food facility
In a Leicester-based catering supply operation serving the city's university and NHS catering sector, a quarterly TR19 extraction clean-down is carried out by an in-house maintenance team. Canopy filters are removed and soaked; the HD140HOT with alkaline degreaser is applied to canopy internals, grease baffles and accessible ductwork at 140 bar and 85°C; emulsified grease is flushed to collection trays and removed with the MAMMOTH 240V Stainless. The RAPID VSC 240V is used on the fryer line and bratt pan surrounds in the same session. TR19 cleaning records are photographed and retained for insurance compliance and fire risk assessment evidence required by Leicestershire Fire and Rescue Service.
Compliance — grease management in Leicester food production
- TR19 — kitchen extraction and ductwork grease cleaning: TR19 (BESA Guide to Good Practice for Kitchen Ventilation Systems) sets cleaning frequency based on cooking hours. High-use operations (over 12 hours per day, 7 days) require quarterly cleaning. TR19 compliance is an insurance requirement for food manufacturers and catering supply operations across Leicester.
- Fire safety — Regulatory Reform (Fire Safety) Order 2005: Grease accumulation in kitchen extraction systems is classified as a fire risk. Leicestershire Fire and Rescue Service and insurance underwriters require evidence of regular extraction cleaning as part of fire risk assessment compliance.
- Food Hygiene Regulations 2006 — fat and grease as contamination risk: Accumulated grease on production equipment surfaces and extraction canopy drip points is a physical and chemical contamination risk. Leicester City Council Environmental Health Officers identify grease accumulation on food contact surfaces as a food hygiene non-compliance during routine inspections.
- Trade effluent — grease trap discharge: Grease trap waste and fat-containing wash water must not enter surface water drains. Severn Trent Water trade effluent consent required for sewer discharge from Leicester food production operations.
Frequently asked questions
What temperature is required to remove carbonised fryer grease in a Leicester food production facility?
Polymerised and carbonised cooking fat requires hot water at a minimum of 70°C to begin emulsification — 85°C at the lance combined with appropriate alkaline degreaser is the standard specification for deep-clean grease removal from commercial fryers, oven interiors and kitchen plant. Cold water pressure washing does not achieve the temperature required to emulsify cooking fat deposits and will not pass ATP verification standards in BRC-audited Leicester food facilities.
How often should kitchen extraction be cleaned in a Leicester food production facility?
TR19 cleaning frequency is determined by cooking hours per week: high-use operations (over 12 hours per day, 7 days) require quarterly cleaning; medium-use (6–12 hours, 5–7 days) require 6-monthly; low-use (under 6 hours, up to 5 days) require annual cleaning. Most Leicester food production and catering supply operations fall into the high-use or medium-use category. TR19 records must be retained as evidence for insurance and fire risk assessment compliance with Leicestershire Fire and Rescue Service.
Can V-TUF hot water pressure washers be used for grease trap cleaning at Leicester food facilities?
Yes — the HD140HOT is the correct specification for softening and loosening accumulated grease in trap chambers and inlet channels before removal. Use the MAMMOTH 240V Stainless to extract the grease-laden water and solid grease deposits. Grease trap waste must be collected by a licensed waste carrier — it must not be discharged to surface water drains or flushed to the sewer without trade effluent consent from Severn Trent Water.
Related food processing cleaning challenges in Leicester
Environmental and drainage compliance
In Leicester food manufacturing operations, grease trap waste and fat-containing wash water must not enter surface water drains. Discharge to the public sewer requires trade effluent consent from Severn Trent Water. See Environmental Permitting guidance →
Servicing, spares and ongoing support
All V-TUF pressure washers and vacuums are supported with UK-based spare parts availability and full servicing support. For technical support, spare parts queries or servicing requirements — telephone 01522 787978.
Back to Food Processing in Leicester → Back to V-TUF Leicester hub →