Automotive Trade & Bodyshop Equipment — Northampton

Automotive trade & bodyshop — Northampton

V-TUF supplies M-Class dust extractors, hot-water pressure washers and heavy-duty wet/dry vacuums to bodyshops, MOT garages, independent workshops and franchise dealer service centres across Northampton and West Northamptonshire. COSHH 2002 requires controlled extraction for brake dust, bodyshop filler sanding and paint mist. Northampton's automotive trade clusters along St James' Road, Weedon Road and the A45 corridor — Riverside Motor Group, Listers and the independent garage sector across the town generate sustained demand for COSHH-compliant workshop equipment. Workshop runoff must not enter surface water drains or the River Nene — Severn Trent Water trade effluent consent is required for sewer discharge. The same dealer estate generates significant mobile valeting and dealership prep demand across the wider Northampton market.

← Back to V-TUF Northampton hub

Recommended machines

V-TUF MIGHTY HSV — 21L M-Class dust extractor

COSHH-compliant specification for bodyshop filler sanding, panel preparation and brake dust extraction. H13 HEPA, 99.9% filtration. Autostart power take-off for orbital sanders and angle grinders. 110V and 240V. SKU MIGHTYHSV110 / MIGHTYHSV240.

View MIGHTY HSV M-Class extractor →

V-TUF HD140HOT — 240V hot water pressure washer

240V, 140 bar, 85°C. Workshop floor degreasing, engine bay cleaning and bay wash-down across Northampton's franchise dealer service centres and independent garages. SKU HD140HOT.

View HD140HOT hot water pressure washer →

V-TUF MAMMOTH 240V Stainless — 80L wet/dry vacuum

3.5kW twin-motor, 80-litre stainless tank. Coolant and fluid pickup, swarf collection and workshop floor wet/dry maintenance. SKU MAMMOTH240-STAINLESS.

View MAMMOTH 240V stainless vacuum →

Typical use case — Northampton franchise dealer service centre

A franchise dealer service centre on St James' Road runs a MIGHTY HSV M-Class (240V, autostart) connected to the DA sander on the bodyshop prep line. The HD140HOT handles workshop floor degreasing between bays. The MAMMOTH 240V Stainless manages coolant spills and wet/dry maintenance. All three on a trade account — next-day parts delivery to NN5 postcode.

Compliance notes for Northampton automotive workshops

COSHH 2002 — brake dust, bodyshop filler dust and paint mist require controlled M-Class extraction. H-Class required where isocyanate or asbestos risk is identified.
Severn Trent Water — trade effluent consent required for workshop runoff discharge to the public sewer.
Environment Agency Midlands — workshop oils must not enter the River Nene or Grand Union Canal. Active enforcement across the Nene Valley.
Asbestos Regulations 2012 — H-Class required for brake work on pre-2000 vehicles.

COSHH Regulations 2002 → Environmental Permitting guidance →