Marine & Boatyard Equipment Portsmouth | Hull Cleaning & Yard Wash-Down | V-TUF

Marine & boatyard equipment — Portsmouth

V-TUF supplies industrial pressure washers, hot-water cleaning systems and heavy-duty wet/dry vacuums to boatyards, marinas, slipway operators, yacht clubs and marine trade businesses across Portsmouth and the Solent. Portsmouth is the UK's foremost naval city and a major centre for both naval and leisure marine activity — HMNB Portsmouth is home to the UK's largest warships including HMS Queen Elizabeth and HMS Prince of Wales, maintained by BAE Systems Maritime Services. Gunwharf Quays Marina, Port Solent Marina, Gosport Marina and Haslar Marina serve the Solent's leisure fleet. Camper & Nicholsons Port Louis marina at Gosport is one of the UK's premier superyacht and large yacht facilities. The Gosport waterfront — including Endeavour Quay and Portchester Boatyard — forms one of the South Coast's most active boatyard and marine engineering corridors. The combination of naval, superyacht, racing and leisure marine activity makes Portsmouth and the Solent one of the UK's highest-demand markets for boatyard wash-down and marine cleaning equipment.

V-TUF equipment is in daily use across Portsmouth's boatyards, marina hardstandings, naval base maintenance facilities and marine trade workshops throughout the Solent area.

← Back to V-TUF Portsmouth hub

Pressure washers for hull cleaning, slipway and yard wash-down

Hull cleaning, antifouling preparation and slipway wash-down across Portsmouth's Gosport boatyard corridor and Solent marina network require high-flow, sustained pressure washing capable of removing marine growth, salt deposits, antifouling paint residue and general boatyard contamination. Hot water is required for effective degreasing of engine bays, bilge areas and marine engineering components across Portsmouth's extensive naval and leisure marine workshops.

V-TUF TORRENT2 — professional cold water pressure washer

Designed for sustained hull cleaning, antifouling preparation and general yard wash-down at Portsmouth's boatyards and marina hardstandings. 200 bar, 15 L/min, 240V. The correct specification for removing marine growth, barnacles and antifouling paint residue from hull surfaces at Gosport Marina, Haslar Marina, Portchester Boatyard and Camper & Nicholsons Port Louis. Suited to the continuous throughput demands of the Gosport marine engineering corridor. Available in 110V and 240V versions. SKU TORRENT2240.

View TORRENT2 professional pressure washer →

V-TUF HD140HOT — 240V hot water professional pressure washer

Designed for engine bay degreasing, bilge cleaning and fuel and oil contamination removal in Portsmouth's marine engineering workshops at Gosport and Endeavour Quay. 240V, 140 bar, 8 L/min. Hot water removes oil, grease and diesel contamination that cold water alone cannot shift. Compact and mobile — suited to use alongside vessels at Portsmouth Harbour berths and on-site at Gosport boatyards. SKU HD140HOT, £1,699.99.

View 240V hot water marine pressure washer →

V-TUF RAPID VSC 240V — stainless hot water pressure washer

Designed for higher-throughput engine degreasing and commercial marine yard cleaning at Portsmouth's larger boatyards and BAE Systems maritime maintenance operations. 240V, 100 bar, 12 L/min. Stainless body construction — suited to the salt-laden tidal environment of Portsmouth Harbour and the Solent. The correct specification for commercial boatyards and naval maintenance facilities requiring sustained hot-water output. SKU RAPIDVSC240V, £3,399.99.

View stainless hot water boatyard pressure washer →

Industrial vacuums for bilge cleaning, fluid collection and marine interiors

V-TUF MAMMOTH 240V Stainless — 80L heavy-duty wet/dry vacuum

Designed for heavy-duty bilge cleaning, fluid collection and wet/dry extraction across Portsmouth's boatyards, marina maintenance operations and Gosport marine engineering workshops. 3.5kW twin-motor, 80-litre stainless tank. Suited to extraction of bilge water, oil-contaminated water, marine debris and cabin interior cleaning across Portsmouth's Solent leisure fleet, superyacht operations at Camper & Nicholsons and the wider naval maintenance sector. Stainless tank construction is the correct specification for Portsmouth Harbour's tidal marine environment. SKU MAMMOTH240-STAINLESS, £989.99.

View 80L stainless bilge and boatyard vacuum →

Environmental compliance for Portsmouth boatyards and marinas

Marine wash-down, antifouling preparation and bilge cleaning generate contaminated water that is subject to strict environmental controls. Portsmouth Harbour is a designated Special Protection Area and Ramsar site for its nationally and internationally important populations of wading birds and waterfowl — including Brent geese, dunlin and black-tailed godwit. The Environment Agency, Natural England and the Portsmouth Harbour Recreational Study all have environmental protection interests in the quality of waterway discharge across Portsmouth's boatyards and marinas.

• Water Resources Act 1991 — surface water and controlled water discharge: Wash-down water from hull cleaning, antifouling preparation and hardstanding cleaning must not enter surface water drains, Portsmouth Harbour or the Solent without consent. Antifouling paint washings are classified as controlled water pollution. Trade effluent consent from Southern Water is required for discharge to the public sewer.
• Antifouling paint and biocide runoff — Portsmouth Harbour SPA and Ramsar: Portsmouth Harbour's dual designation as a Special Protection Area and Ramsar wetland means antifouling biocides entering the water column are subject to heightened regulatory scrutiny. Copper-based and zinc-based antifouling systems are widely used across the Solent fleet. All hull cleaning and antifouling preparation must take place over contained hardstanding or in dry dock environments where washings are collected and disposed of as controlled waste.
• Oil and fuel contamination — bilge water discharge: Bilge water containing oil or fuel must not be discharged to Portsmouth Harbour or controlled waters. Bilge water collection services are available at Gunwharf Quays Marina, Gosport Marina and Haslar Marina for vessels requiring compliant disposal.
• Environment Agency guidance — boat maintenance and the environment: Portsmouth's boatyards and marinas are subject to inspection and enforcement under the Environmental Permitting (England and Wales) Regulations 2016. Portsmouth Harbour's SPA and Ramsar status means the Environment Agency treats biocide and oil pollution incidents in Portsmouth as priority enforcement matters.

Environmental Permitting guidance →

Choosing the right equipment for your Portsmouth marine operation

• Hull cleaning, antifouling prep and slipway wash-down — Gosport Marina, Haslar, Portchester Boatyard: TORRENT2 (200 bar, cold water, high flow — correct sustained specification for marine growth removal)
• Engine bay degreasing and bilge area cleaning — mobile use at Gosport and Portsmouth berths: HD140HOT (240V hot water, compact, 140 bar — removes oil and diesel contamination cold water cannot shift)
• Commercial boatyard operations — Endeavour Quay, larger yard throughput: RAPID VSC 240V (stainless, 100 bar, 12 L/min — sustained output across large marine hardstanding areas)
• Bilge water extraction, fluid collection and cabin interior cleaning: MAMMOTH 240V Stainless (80L, stainless tank — correct specification for the Portsmouth Harbour tidal environment)
• Superyacht and large yacht operations at Camper & Nicholsons Port Louis: TORRENT2 for hull cleaning; MAMMOTH 240V Stainless for interior extraction and detailed bilge work

For guidance on selecting the correct equipment for your Portsmouth marine or boatyard operation — telephone 01522 787978. Trade account terms available, next-day delivery to Portsmouth and Hampshire PO postcodes on stocked items.

Frequently asked questions

What pressure washer is correct for hull cleaning at Gosport or Portsmouth's Solent marinas?

For hull cleaning and antifouling preparation, you need a cold water pressure washer with sufficient flow rate to remove marine growth and antifouling residue effectively. The V-TUF TORRENT2 (200 bar, 15 L/min) is the correct specification for sustained hull cleaning at Gosport Marina, Haslar Marina, Portchester Boatyard and Camper & Nicholsons. All antifouling washings must be collected and not allowed to enter Portsmouth Harbour — the Harbour's SPA and Ramsar designation means biocide runoff is a priority enforcement matter for the Environment Agency.

Can I discharge boatyard wash-down water to the drain at my Portsmouth marina?

Not without appropriate controls. Hull cleaning water containing antifouling biocides, marine growth or fuel and oil contamination is controlled water pollution under the Water Resources Act 1991 and must not enter surface water drains or Portsmouth Harbour. Discharge to the public sewer requires trade effluent consent from Southern Water. Portsmouth Harbour's designation as a Special Protection Area and Ramsar wetland means the Environment Agency treats biocide runoff from Portsmouth boatyards as a priority enforcement matter. All antifouling washings must be collected as controlled waste.

What vacuum is recommended for bilge cleaning at Gosport or superyacht operations at Camper & Nicholsons?

The V-TUF MAMMOTH 240V Stainless (80L, twin-motor, stainless tank) is the correct specification for bilge cleaning across Portsmouth's leisure, superyacht and commercial fleet. The stainless tank construction is essential in Portsmouth Harbour's tidal marine environment — standard steel tanks corrode rapidly in salt-laden conditions. Bilge water containing oil or fuel must not be discharged to Portsmouth Harbour. Bilge water collection services are available at Gunwharf Quays Marina, Gosport Marina and Haslar Marina.

Servicing, spares and ongoing support

All V-TUF pressure washers and vacuums are supported with UK-based spare parts availability and full servicing support. Pumps, hoses, lances, nozzles, motors and replacement components are held for every machine in current production — supporting the sustained operational requirements of Portsmouth's boatyards, marinas and Gosport marine engineering corridor.

V-TUF Support Hub →   Spare parts for all machines →

For technical support, spare parts queries or servicing requirements — telephone 01522 787978.