V-TUF XR11000 vs XRR6500 vs Numatic WVD900 | Industrial Wet & Dry Vacuum Comparison
V-TUF XR11000 vs XRR6500 vs Numatic WVD900-2 — 110V Industrial Wet & Dry Vacuum
Comparing three 110V twin-motor industrial wet and dry vacuums — the V-TUF XR11000-110, V-TUF XRR6500-110 and Numatic WVD900-2 110V — across tank capacity, airflow, wet recovery, filtration and hire fleet suitability.
Full specification comparison
| Specification | V-TUF XR11000-110 | V-TUF XRR6500-110 | Numatic WVD900-2 110V |
|---|---|---|---|
| Motor Power | 2 × 1000W (2000W Total) | 2 × 1000W (2000W Total) | 2 × 1000W TwinFlo |
| Airflow | 106 L/sec | 106 L/sec | 98 L/sec |
| Suction | 250 mbar | 250 mbar | Approx. 235–240 mbar |
| Tank Capacity | 110L | 80L | 90L Gross |
| Wet Capacity | 80L | 54L | 32L |
| Dry Capacity | 110L | 65L | 40L |
| Weight | 28kg | 27kg | 28kg |
| Noise Level | 80dB | 75dB | Not Published |
| Cable Length | 5m | 5m | 10m NuCable |
| Filter Type | Washable Cartridge | Cartridge Filter | Permatex System |
| Construction | Industrial Chassis | Industrial Chassis | Structofoam Body |
Why the XR11000 leads this comparison
- 110L total capacity — nearly 3× the dry capacity of the Numatic WVD900 (40L) and significantly larger than the XRR6500 (65L). Fewer empties, less downtime on site.
- 80L wet recovery — 2.5× the Numatic's 32L wet capacity. The XR11000 is the right specification for flood recovery and large-volume water removal.
- 106 L/sec airflow — 8% higher than the Numatic's 98 L/sec at equivalent motor power. Faster clean-up, higher productivity.
- Equal weight at 28kg — the XR11000 delivers significantly more capacity without a weight penalty over the Numatic.
- Washable filter system — lower ongoing consumable costs versus Numatic's Permatex bag system.
- Industrial chassis construction — designed for hire fleet and construction site durability.
Which machine for which application
XR11000-110 — high-volume wet and dry, flood recovery, large site clean-down
The 110L / 80L wet specification makes the XR11000 the right choice for flood recovery operations, large construction site clean-down, basement water removal and any application where tank emptying frequency is a productivity constraint.
XRR6500-110 — mid-capacity with lower noise
The XRR6500 offers the same motor and airflow specification as the XR11000 in a lower-capacity, lower-noise package at 75dB. Right specification for occupied environments where noise is a constraint.
Numatic WVD900-2 — established brand, longer cable
The Numatic's 10m NuCable system gives greater reach from a single power point. Where cable reach matters more than tank capacity, the WVD900 has an advantage. However the 32L wet capacity and 40L dry capacity are significantly below the XR11000 for demanding applications.
Related pages
All V-TUF comparisons Construction hub M-Class extraction Facilities management
Telephone: 01522 787978 | Email: enquiries@v-tuf.com