PUMP & GEARBOX - V-TUF SUPER SERIES XHDM300SSGB 3/4" HOLLOW SHAFT 12 L @ 200 BAR 1450 RPM - XHDM300SS-GBKIT

Pump & Gearbox - V-TUF Super Series XHDM300SSGB, 3/4" Hollow Shaft, 12 L @ 200 Bar 1450 RPM (XHDM300SS-GBKIT) is the XHDM300SS solid 24mm shaft pump pre-assembled with the XHDG200SS gearbox, delivering 12 L/min at 200 Bar at 1450 RPM with a 3/4" female hollow shaft input. Features toughened nickel-plated pump heads, a larger oil bath, extra cooling fins, and quieter running.

For: Engine-driven pressure washer installations requiring a 3/4" hollow shaft pump and gearbox at 200 Bar. Compatible engines: Honda GX200QX, GX160QX, V-TUF Loncin VLCP065, VLCP07. 6.5HP required to run at full pressure. Sometimes used on TORRENT 1GB and Honda GB060 pressure washers.

Key specifications:

• Flow: 12 L/min
• Pressure: 200 Bar (2950 PSI)
• Speed: 1450 RPM
• Input: 3/4" female hollow shaft
• Ports: 2x inlet 1/2" F BSP (one blanked), 2x outlet 3/8" F BSP (one supplied with blanking plug)

What's included:

• 1x XHDM300SS-GBKIT assembled pump and gearbox unit (unloader valve not included)

Important: Some mains water supplies cannot cope with 12 L/min — running on suction from a water butt or tank is advised if unsure. This pump is NOT supplied with an unloader valve and MUST be fitted with one before operation. Service parts: piston fastener kit 6061E1 KIT134, pump head bolt/washer N601-327BSFW, valve kit VTPKIT2, water seal kit VTPKIT135, breather plug VTPSBR01, piston kit VTPS120554, piston oil seals O.SEAL2A, oil PL500, sight glass VTPSSGSS.

Safety — before powering the system:

1. The unloader valve MUST be set to minimum pressure.
2. The bypass port MUST be open.
3. Set the unloader to the required pressure, which MUST be less than both the unloader's maximum rated pressure and your equipment's maximum pressure (do not exceed 200 Bar / 2950 PSI).
4. Set the locking nuts so the running pressure and lock line pressure cannot be exceeded.

Caution: this is high pressure equipment. Failing to follow the above safety and set-up rules can cause serious equipment damage and injury — caps and joints can be blown clean out of their threads, creating dangerous projectiles. Call 01522 787978 if you need assistance.

Support: See the Pump Spare Parts page, or call our Lincoln service team on 01522 787978.

Genuine V-TUF part, supplied from our Lincoln warehouse.