PUMP - V-TUF SUPER SERIES XHDM600SS 30L/Min 300BAR, 1450RPM, MALE SHAFT - XHDM600SS

V-TUF Super Series XHDM600SS Solid Shaft Pump 30 L/min @ 300 Bar 1450 RPM (XHDM600SS) is a heavy-duty industrial triplex pump with 24mm solid shaft, delivering 30 L/min at 300 Bar at 1450 RPM. Robustly built with die-cast aluminium alloy body and cover, oil drain outlet and sight glass, dipstick oil level cap, and a high-strength pressed-steel pump shaft. 100% manufactured in the EU.

For: Heavy-use industrial and commercial cleaning systems requiring a high-flow 300 Bar pump at 1450 RPM.

Key specifications:

• Flow: 30 L/min
• Pressure: 300 Bar
• Speed: 1450 RPM
• Shaft: 24mm solid
• Drive: XHDG500SS gearbox (1" shaft, 22-24HP engines) or XHDGPTO Super Series PTO gearbox
• Ports: 2x inlet 1/2" F BSP (one blanked), 2x outlet 3/8" F BSP (one supplied with blanking plug)

What's included:

• 1x XHDM600SS pump (unloader valve not included)

Important: Most mains water supplies cannot cope with this flow rate — running on suction from a water butt or tank is advised if unsure. This pump is NOT supplied with an unloader valve and MUST be fitted with one before operation.

Safety — before powering the system:

1. The unloader valve MUST be set to minimum pressure.
2. The bypass port MUST be open.
3. Set the unloader to the required pressure, which MUST be less than both the unloader's maximum rated pressure and your equipment's maximum pressure (do not exceed the pump's 300 Bar rating).
4. Set the locking nuts so the running pressure and lock line pressure cannot be exceeded.

Caution: this is high pressure equipment. Failing to follow the above safety and set-up rules can cause serious equipment damage and injury — caps and joints can be blown clean out of their threads, creating dangerous projectiles. Call 01522 787978 if you need assistance.

Support: See the Pump Spare Parts page, or call our Lincoln service team on 01522 787978.

Genuine V-TUF part, supplied from our Lincoln warehouse.