UNLOADER 1 KIT1 - UNLOADER - RETURN TO TANK - C0.081-KIT1
UNLOADER 1 KIT1 - UNLOADER - RETURN TO TANK - C0.081-KIT1
Key Features
- GENUINE V-TUF UNLOADER KIT – return-to-tank bypass configuration
- REDUCES PUMP HEAT BUILD-UP – routes bypass flow back to the water tank
- FOR EXTENDED BYPASS USE – protects the pump during prolonged idle running
- FOLLOW SAFE COMMISSIONING STEPS – set at minimum pressure with bypass open before use
- GENUINE V-TUF PART – supplied from our Lincoln warehouse with full UK-based service support
Description
Unloader 1 Kit1 – Unloader, Return to Tank (C0.081-KIT1) is a return-to-tank unloader valve kit, routing bypass flow back to the water tank to reduce pump heat build-up during extended bypass operation.
For: Pressure washer pump sets requiring a return-to-tank unloader configuration.
Key specifications:
- Type: Return-to-tank unloader kit
What’s included:
- 1x C0.081-KIT1 unloader kit
Important safety note: Before powering the system: 1) the unloader valve MUST be set at minimum pressure; 2) the bypass port MUST be open; 3) then set the unloader to the required pressure, which MUST be less than the maximum unloader pressure AND less than the maximum pressure of your equipment; 4) set the locking nuts so this pressure cannot be exceeded. This is high pressure equipment — if these safety and set-up rules are not followed, serious damage to equipment and injury to people can occur, including caps and joints being blown out of their threads as dangerous projectiles.
Support: See the Unloader Valve Spare Parts page, or call our Lincoln service team on 01522 787978.
Genuine V-TUF part, supplied from our Lincoln warehouse.